Products

Principle of water outlet cutting:
The flatness of the product vibration can be controlled within 0.05mm (under the unified standard design of the rubber mouth), except for TPU soft glue that cannot be cut off, other hard glue products are universal, and the equipment and fixtures are more than 90% universal.
Technical specifications:
1. Working frequency: 15K/20KHz;
2. Power: 1200-2000W;
3. Amplitude: 1% -100% adjustable;
4. Input voltage: 220V;
5. The electrical box and transducer adopt an air-cooled heat dissipation system:
6. Operation mode: Manual feeding, foot switch activated;
7. External dimensions: length 320/width 150/height 230mm;
8. No need to use air pressure or adjust vibration parameters.
Equipment advantages:
1. Replace traditional stamping, air cutting, and manual cutting;
2. Efficient, time-saving and labor-saving, product separation without deformation, and no residual water outlet;
3. Small size, simple operation, no need to repeatedly adjust the vibration parameters;
4. It can be connected to a plastic injection molding robot for unmanned operation;

5. The overall design is flexible and easy to operate.

Applicable scope:
Suitable separation materials for water outlets: ABS, AC, PC, ABS+PC, ceramic steel, wave fiber and other hard materials, not suitable for soft materials such as PP, PE, PVC.
Common products: electronic products such as buttons, buttons, rivets, watches, and various injection molded rubber accessories.